Search all Equipment Experts Listings
Near:

2019 Finlay I-120RS For Sale

$675,000

$11,187*

EST PER MO.

Stock#: E00056129

VIN#: TRX120RSLOML11882

2019 Finlay I-120RS For Sale

$675,000

$11,187*

EST PER MO.

Stock#: E00056129

VIN#: TRX120RSLOML11882

Equipment Specification

Description

FINLAY I-120RS EQUIPPED AS PER BELOW:ENGINE- TIER 4 FINAL /STAGE IV : SCANIA DC9 257KW (350 HP) ENGINEIMPACT- TEREX CR038 IMPACT CHAMBERCHAMBER:- FULLY HYDRAULICALLY ASSISTED APRON SETTING AND HYDRAULIC APRON RELEASE- MANUAL RAISE CHAMBER FLAP ALLOWING EXTRA INLET CLEARANCE- 4 BAR ROTOR - MARTENSITIC BLOW BARS 2 HIGH & 2 LOW- DIRECT DRIVE VIA CLUTCH- DRIVE BELT TENSIONER WHEEL- BLOW BAR LIFTING TOOL SUPPLIED.- SMALLER ENGINE CHAMBER DRIVE PULLEYTO GIVE A ROTOR LOWER SPEED RANGE.STANDARD LARGE PULLEY STILL DISPATCHED WITH MACHINE- ROTOR FITTED WITH 2 FULL MARTENSITIC CERAMIC & 2 LOW MARTENSITICBLOW BARSHOPPER & FEEDER:- VGF FIXED HOPPER- STEPPED GRIZZLY FEEDER WITH INTEGRAL PRE-SCREENSTANDARD 50MM SPACING- MESH APERTURE ON GRIZZLY FEEDER: 38MM- SELECTABLE DISCHARGE TO BY-PASS CONVEYOR OR MAIN CONVEYOR- BLANKING MAT FOR VGF- INDEPENDENT PRE-SCREEN C/W HYDRAULICALLY FOLDING AND LOCKINGHOPPER AND BLANKING MAT. 2" SQUARE OPENING SCREENS INSTALLEDBLANKING MATINSTALLED- INDEPENDENT PRE-SCREEN HOPPER EXTENSIONS- BOFOR BARS REMOVED IN THE INDEPENDENT PRE-SCREENMAIN CONVEYOR:- 1100MM (43.3") BELT FULL LENGTH- UNDER CRUSHER VIBRATORY FEEDER WITH WEAR RESISTANT STEEL LINERS (C/W SHORTENEDMAIN CONVEYOR)AUXILIARY CONVEYORS:- HYDRAULIC RAISE/ LOWER FOR MAGNET- PIPED FOR OVER BAND MAGNET- BYPASS CONVEYOR WITH 650MM WIDE PLAIN BELTDISCHARGING TO THE LHS OF THEMACHINE.- TWIN POLE OVER BAND MAGNET C/W STAINLESS STEEL SKIRTING & STAINLESS STEELDISCHARGE CHUTEDISCHARGING TO RHS OF THE MACHINE.RS COMPONENTS:- 3.66M X 1.52M (12- X 5-) TWO DECK AFTER SCREEN C/W 50MM TOP DECK AND 40MMBOTTOM DECK MESH AS STANDARD UNLESS OTHERWISE STATED- 500MM (20") WIDE BELT SINGLE TRANSFER CONVEYOR COLLECTING MATERIAL FROM BOTHDECKS.- 500MM (20") WIDE BELT HYDRAULIC FOLDING RE-CIRCULATING CONVEYOR ABLE TO SLEWFOR STOCKPILING OVERSIZE MATERIAL- 1400MM (55") WIDE BELT FINES CONVEYOR- RAPID DETACH AFTER SCREEN SYSTEM FOR FLEXIBILITY.- BELT WEIGHER- ADDITIONAL TRANSFER CONVEYOR FOR COLLECTING MATERIAL FROM EACH INDIVIDUAL DECKOF SCREEN BOXCLIMATE SPEC:- STANDARD OILS - (RECOMMENDED FOR AMBIENT TEMPERATURES BETWEEN -5 TO +30C)DUST SUPPRESSION:- PIPED FOR DUST SUPPRESSION C/W SPRAY BARS- WATER PUMP FOR DUST SUPPRESSIONELECTRICAL:- EMERGENCY STOPS- HAND HELD TRACK CONTROL SET WITH CONNECTION LEAD- T-LINK TELEMETRY SYSTEM FITTED C/W 3 YEARS DATA SUBSCRIPTION- RADIO REMOTE SYSTEM: OPERATIONAL CONTROLS OF MACHINE (AUTO START/STOP) & TRACKMOVEMENT- PRESSURIZED AIR SYSTEM FOR ELECTRICAL CONTROL CABINET- LIGHTNING MASTSAFETY GUARDS IN COMPLIANCE WITH MACHINERY DIRECTIVE

Dealer's Specification

  • Category:
    26
  • Currency:
    USD
  • Edit Date:
    2021-11-25T19:56:14.88
  • Type Id:
    626
  • Class:
    30
  • Dealer Id:
    GENERALEQSUPPLIES
  • Hours:
    1229.85
  • Type Name:
    Aggregate Impact Crushers

Equipment Insights

No price changes |
75 days on site
0 saves

Calculate Payment

Summary
Price $675,000
Down Payment $0
Total Amount $675,000

$11,187/mo*

Estimated Monthly Payment

Compare Similar Equipment

Recently Viewed

Added to Comparison

You can compare up to 6 pieces of equipment at a time.

* This calculator is intended for use as a guide only. This simulation and the resulting calculations do not constitute any form of agreement, application, or offer from the seller or Randall-Reilly. The figures and formulae used may change at any time without notice. Calculated results are for illustrative purposes only and accuracy is not guaranteed. Title and other fees are not included in the calculation. Other taxes may apply. Randall-Reilly accepts no responsibility for any losses arising from any use of or reliance upon any calculations or conclusions reached using the calculator.
Listing ID: 3609584