Search all Equipment Experts Listings

2022 Finlay I-140RS For Sale

Call for Price

Stock#: E00060943

VIN#: TRX140RSTOMN37718

2022 Finlay I-140RS For Sale

Call for Price

Stock#: E00060943

VIN#: TRX140RSTOMN37718

Equipment Specification

Description

FINLAY I-140RS TRACKED IMPACTOR PLANT EQUIPPED AS PER BELOW:ENGINE: - TIER 4 FINAL: SCANIA DC13 368KW (500HP) ENGINE IMPACT CHAMBER: - TEREX CR032 IMPACT CHAMBER - FULLY HYDRAULICALLY ASSISTED APRON SETTING AND HYDRAULIC APRON RELEASE - MANUAL RAISE CHAMBER FLAP ALLOWING EXTRA INLET CLEARANCE - 4 BAR ROTOR - TOOL STEEL BLOW BARS 2 HIGH & 2 LOW - DIRECT DRIVE VIA CLUTCH - DRIVE BELT TENSIONER WHEEL - BLOW BAR LIFTING TOOL SUPPLIED - TIP SPEED RANGE 35-44 M/SEC (115-144FT./SEC) - SMALLER DRIVE PULLEY FITTED TO GIVE A ROTOR TIP SPEED RANGE OF 31-39M/SEC (102-128FT./SEC) STANDARD LARGE PULLEY STILL DISPATCHED WITH MACHINE - HYDRAULIC RAISE OF CHAMBER INLET FLAP - ROTOR FITTE WITH (2) FULL MATENSITIC CERAMIC & 2 LOW MARTENSITIC BLOW BARS HOPPER & FEEDER: - VGF FIXED HOPPER - STEPPED GRIZZLY FEEDER WITH INTEGRAL PRE-SCREENSTANDARD 50MM SPACING - MESH APERTURE ON GRIZZLY FEEDER: 38MM (1.50") - SELECTABLE DISCHARGE TO BY-PASS CONVEYOR OR MAIN CONVEYOR - BLANKING MAT FOR VGF - PRE-SCREEN TOP DECK FITTED WITH SIDE TENSIONED MESH30MM APERTURE STANDARD - INDEPENDENT PRE-SCREEN C/W HYDRAULICALLY FOLDING AND LOCKING HOPPER AND BLANKING MAT50MM CASSETTE SPACING * 38MM MESH AS STANDARD - INDPENDENT PRE-SCREEN HOPPER EXTENSIONS - PRE-SCREEN PUNCH PLATE OPTIONAL SPACING - 25MM/50MM/75MM - NEED TO SPECIFY MAIN CONVEYOR: - 1300MM (51") BELT FULL LENGTH - PIPED FOR OVERBAND MAGNET - HYDRAULIC RAISE/LOWER FOR MAGNET - UNDER CRUSHER VIBRATORY FEEDER WITH WEAR RESISTANT STEEL LINERS (C/W SHORTENED MAIN CONVEYOR) AUXILARY: - BYPASS CONVEYOR WITH 80MM WIDE PLAIN BELTDISCHARGING TO THE RHS OF THE MACHINE - TWIN POLE OVERBANMAGNET C/W STAINLESS STEEL SKIRTING & STAINLESS STEEL DISCHARGE CHUTEDISCHARGING RHS OF THE MACHINE RS COMPONENTS: - 4.88M X 1.52M (16- X 5-) SINGLE DECK AFTER SCREEN C/W 40MM MESH AS STANDARD UNLESS OTHERWISE STATED - 500MM (20) WIDE BELT TRANSFER CONVEYOR - 500MM (20") WIDE BELT HYDRAULIC FOLDING RE-CIRCULATING CONVEYOR ABLE TO SLEW FOR STOCKPILING OVERSIZE MATERIAL - 1400MM (55") WIDE BELT FINES CONVEYOR - RAPID DETACH AFTER SCREEN SYSTEM FOR FLEXIBILITY - BELT WEIGHER BELT SCALE CLIMCATE SPEC: - STANDARD OILS (RECOMMENDED FOR AMBIENT TEMPERATURES BETWEE -5 TO +30 DEG. C DUST SUPPRESSION: - PIPED FOR DUST SUPPRESSION C/W SPRAY BARS - WATER PUMP NOT INCLUDED ELECTRICAL: - EMERGENCY STOPS - HAND HELD TRACK CONTROL SET WITH CONNECTION LEAD - RADIO REMOTE SYSTEM: OPERATIONAL CONTROLS OF MACHIN (AUTO START/STOP) & TRACK MOVEMENT - PRESSURISED AIR SYSTEM FOR ELECTRICAL CONTROL CABINET GENERAL: - SAFETY GUARDS IN COMPLIANCE WITH MACHINERY DIRECTIVE - AUXILIARY DRIVE

Unit of Measurement
  • Category:
    26
  • Currency:
    USD
  • Type Id:
    626
  • Class:
    30
  • Edit Date:
    2022-10-04T19:56:16.457
  • Type Name:
    Aggregate Impact Crushers

Equipment Insights

No price changes |
2 days on site
0 saves

About the Dealer

Our company was founded in 1984 by four former employees of General Diesel and Equipment. Our primary focus has been to supply heavy construction and aggregate equipment to the construction, mining, oil exploration industries, as well as the municipal governments in North Dakota, South Dakota, Minnesota and Iowa. Starting with one location and 22 employees in 1984, we have grown to 250+ employees in ten U.S. locations including Fargo, Minot, Bismarck and Williston ND; Rapid City and Sioux Falls, SD; Shakopee, Duluth and Hibbing, MN; and Urbana, IA. We also have two locations in Canada in Regina, SK and Winnipeg, MB.

View more listings from General Equipment and Supplies
Listing ID: 3953310