Description

FINLAY 893+ SUPERTRAK SCREENING PLANT EQUIPPED AS PER BELOW:- ENGINE:- TIER F4/STAGE IV - CATERPILLAR C4.4 - 4 CYLINDER DIESEL ENGINE DEVELOPING129KW (173) HP @ 2200 RPMAPRON FEEDER:- ABBRASION RESISTANT PLATE STEEL PAN APRON FEEDER WITH HEAY DUTYCHAIN DRIVE- FIXED HOPPER- REMOTE START STOP OF APRON FEEDER- ADJUSTABLE FEED HEIGHT - 435MM RANGE- 10MM ABBRASION RESISTANT PLATE LINED HOPPER- HYDRAULICALLY FOLDING HOPPER EXTENSIONSSCREEN BOX:- MODULAR CONFIGURATION SCREEN BOX- HYDRAULIC RAISE FOR MESH CHANGING (600MM)- 6.1M X 1.83M (20- X 6-) TOP DECK SCREEN AND 5.5M X 1.83M (18- X 6-) BOTTOMDECK SCREEN- TOP DECK SIDE TENSION AND BOTTOM DECK END TENSIONED MESH FITTINGPARTS AS STANDARD- SCREEN BOX EXTENSIONS FITTED AS STANDARDINLET EXTENSIONS FOLDFOR TRANSPORT- TOP DECK ABBRASION RESISTANT PUNCH PLATE(35/40/50/60/75/85/100/125/150MM) (172/200MM PUNCH PLATE ALSO AVAILABLEBUT ONLY ON LAST (2) SCREENS - MAX PIECE SIZE NOT TO EXCEED 750MM3BASED ON A MATERIAL DENSITY OF 1 600KG/M3- TOP DECK MESH (20-150MM) - MAX PIECE SIZE NOT TO EXCEED 750MM3BASED ON A MATERIAL DENSITY OF 1 600KG/M3- BOTTOM DECK MESH/SPEEDHARP (10-60MM)- HYDRAULIC TENSIONING (BOTTOM DECK SCREEN END TENSIONED MESH)- CHAIN BLANKET FOR OVER THE SCREEN BOXCONVEYORS:- 1600MM (63") WIDE O/S CONVEYOR C/W CHEVRON BELT & SKIRTING- OVERSIZE CONVEYOR HAS IMPACT BARS IN FEEDBOOT AND IMPACT SLIPSTHEREAFTER- 900MM (36") WIDE CHEVRON BELT ON MIDDLE GRADE CONVEYOR WITHVARIABLE SPEEDTHUMPER ROLLER AND TELESCOPE HEAD SECTION- 1050MM (41") WIDE PLAIN BELT ON FINES CONVEYOR WITH VARIABLE SPEEDBELT SCRAPER & TELESCOPIC HEAD SECTION- 1400MM (55") WIDE PLAIN BELT ON TRANSFER CONVEYOR WITH VARIABLESPEED CONTROL & HIGH SPEC SCRAPER- INDEPENDENT HYDRAULIC DRIVE FOR EACH CONVEYOR- PRESSURE SENSOR PROTECTION AGAINST OVERLOAD ON FINES ANDTRANSFER CONVEYORELECTRICAL:- EMERGENGY STOPS (4 NR)- CONTROL OPERATION OF TRACKS VIA HAND HELD-SET WITH 5MCONNECTION LEAD- T-LINK TELEMETRY SYSTEM FITTEC C/W 3 YEARS DATA SUBSCRIPTIONGENERAL:- LOW LEVEL GREASING- 1 NR STOCKPILER DRIVE- HYDRAULIC TANK 206 US GALLONSGUARDING:- WE DO NOT WARRANT THAT OUR GUARDS WILL MEET ALL LOCAL CODES. ITIS THE RESPONSIBILITY OF THE END USER TO HAVE THEM CHECKED BY ALOCAL INSPECTORADDED OPTIONS FROM THE FACTORY:- 4" SIDE TENSION PUNCH PLATE INSTALLED IN TOP DECK- 1 1/2" END TENSION SQUARE OPENING SCREENS IN BOTTOM DECK