Description

2017 KOMATSU PC138USLC-11 HYDRAULIC EXCAVATOREQUIPPED WITH:ENGINE: - KOMATSU SAA4D95LE-7 TIER 4 FINAL EMISSIONS CERTIFIED ENGINE - NET 93.47HP @ 2 050 RPM - KDOC (AFTER TREATMENT ASSEMBLY) - AFTER-COOLEDTURBOCHARGEDDIRECT INJECTION - SELECTIVE CATALYTIC REDUCTION SYSTEM (SCR)ELECTRICAL SYSTEM: - ALTERNATOR (60 AMPERE / 24V) - LARGE CAPACITY BATTERIES (2 X 12V / 64 AH) - WORKING LIGHTS (1 CAB LH SIDE / 1 BOOM LH SIDE) - BATTERY DISCONNECT SWITCHUNDERCARRIAGE: - 24" TRIPLE GROUSER SHOES WITH GREASE SEALED LINK ASSEMBLIES (EACH SIDE) - HYDRAULIC TRACK ADJUSTERS (EACH SIDE)OPERATOR ENVIRONMENT: - CABALL WEATHER SOUND SUPPRESSION TYPE WITH TINTED SAFETY GLASS WINDOWS PULL-UPTYPE FRONT WINDOW WITH LOCK DEVICEREMOVABLE LOWER WINDSHIELD LARGE CEILING HATCHLOCKABLE DOORCAB-FRAME MOUNTED INTERMITTENT WINDOW WIPER AND WASHERFLOOR MATCIGARETTE LIGHTER (24V)AM/FM RADIOAIR CONDITIONERHEATERAND DEFROSTERHOT/COLD STORAGE BOXANTENNA - LARGE LCD HIGH RESOLUTION COLOR MONITOR PANEL - SEATSLIDING TYPESUSPENSION RECLINING AND TILT SLIDE MECHANISM WITH CONSOLE MOUNTED ARM RESTS - OPERATOR PROTECTIVE GUARD (OPG) LEVEL 1TOP GUARD - ROPS CERTIFIED CABHYDRAULIC CONTROLS: - HYDRAUMIND SYSTEMFULL HYDROSTATIC WITH CLOSED CENTER LOAD SENSING (CLSS) AND ENGINE SENSING WITH VARIABLE SPEED MATCHING CONTROL - AUTOMATIC ENGINE WARM-UP SYSTEM - ENGINE OVERHEAT PREVENTION SYSTEM - 1 AXIAL PISTON SWING MOTOR WITH SINGLE STAGE RELIEF VALVE - 2 AXIAL PISTON TRAVEL MOTORS WITH COUNTER BALANCE VALVE - 1 VARIABLE CAPACITY PISTON PUMP - 7 SPOOL CONTROL VALVE (BOOMARMBUCKETSWINGRIGHT TRAVELLEFT TRAVEL AND 1 SERVICE VALVE - BOOM HOLDING VALVES - PATTERN CHANGE VALVE (ISO TO BH CONTROL)DRIVE AND BRAKE SYSTEM: - HYDROSTATIC3 (2) TRAVEL SPEEDS SYSTEM W/ AUTO-SHIFT AND PLANETARY DOUBLE REDUCTION TYPE FINAL DRIVE OTHER STANDARD EQUIPMENT: - COUNTERWEIGHT6525 LBS - KOMTRAX 5.0 MONITORING SYSTEMINCLUDED OPTIONAL EQUIPMENT: - 20.00" RUBBER ROAD LINER PADS - 15-1" (4600MM) MONO BOOM WITH +1 ATT PIPING - 9-1" (3000MM) ARM ASSEMBLY WITH +1 ATT PIPING - HYDRAULIC CONTROL UNIT - DOZER BLADE ASSEMBLY8-6" (2590MM) WIDEWITH WELDED CUTTING EDGE

• Arm (stick) length used for dimensions & forces

  8' 2" ft/in
• Max depth of vertical wall

  16' 1" ft/in
• Dump height

  22' 5" ft/in
• Engine make

  Komatsu
• Net hp

  97.3
• Max normal relief valve pressure

  5,050 psi
• Transport height

  9' 3" ft/in
• Tail overhang over side

  0' 10" ft/in

• Max dig depth

  18' 0" ft/in
• Reach @ ground level

  26' 10" ft/in
• Bucket capacity, SAE heaped, min-max

  0.34 - 1.00 cu yds
• Engine model

  SAA4D95LE-7
• Total flow of main pumps, implement & swing

  64 gpm
• Transport length

  24' 3" ft/in
• Transport width

  8' 6" ft/in

• Operating weight

  17.0 metric tons
• Engine model

  SAA4D95LE-7

• Engine make

  Komatsu
• Net hp

  97.3

View full model specs

powered by

* The information presented includes manufacturer’s specifications and is made available solely for general information purposes. Randall-Reilly does not warrant the accuracy, completeness, or usefulness of this information. Any reliance you place on such information is strictly at your own risk. Any descriptions and specifications with respect to any goods offered for sale herein are not warranted to be accurate or complete. Purchaser agrees that it is purchaser’s responsibility to conduct an inspection of the goods sold herein.