Search all Equipment Experts Listings

2017 Komatsu PC290LC-11 For Sale

$189,000

4,707 hrs

Stock#: E00063618

VIN#: A27299

2017 Komatsu PC290LC-11 For Sale

$189,000

4,707 hrs

Stock#: E00063618

VIN#: A27299

Equipment Specification

Description

KOMATSU PC290LC-11 HYDRAULIC EXCAVATOR EQUIPPED WITH THE FOLLOWING:ENGINE: - KOMATSU SAA6D107E-3-B EPA TIER 4 FINAL EMISSIONS CERTIFIED ENGINE - 197 HP (147 KW) @ 2 050 RPM - KOMATSU DIESEL PARTICULATE FILTER (KDPF) - SELECTIVE CATALYTIC REDUCTION (SCR) AFTER TREATMENT WITH DFF/ADBLUE TANK AND HEATED LINES - AFTER-COOLEDKVGT TURBOCHARGEDDIRECT INJECTIONELECTRICAL SYSTEMS: - ALTERNATOR (90 AMPERE / 24V) - LARGE CAPACITY BATTERIES (2 X 12V / 170 AH) - WORKING LIGHTS (1 FRONT RH SIDE / 1 BOOM LH SIDE) - BATTERY DISCONNECT SWITCHUNDERCARRIAGE: - 31.5" (800MM) TRIPLE GROUSER SHOES WITH SEALED (DRY) LINK ASSEMBLY (EACH SIDE)OPERATOR ENVIRONMENT: - CABALL WEATHER SOUND SUPPRESSION TYPE WITH TINTED SAFETY GLASS WINDOWS PULL-UP TYPE FRONT WINDOW WITH LOCK DEVICEREMOVABLE LOWER WINDSHIELDLARGE CEILING HATCHLOCKABLE DOORCAB-FRAME MOUNTED INTERMITTENT WINDOW WIPER AND WASHERFLOOR MATCIGARETTELIGHTER (24V)AM/FM RADIOAIR CONDITIONER HEATER AND DEFROSTERHOT/COLD STORAGE BOXANTENNA - LARGE LCD HIGH RESOLUTION COLOR MONITOR PANEL; WORKING MODE SELECTION - HIGH BACKFULLY ADJUSTABLE AIR SUSPENSION SEAT WITH DOUBLE SLIDE MECHANISM WITH CONSOLEMOUNTED ARM RESTS - RETRACTABLE SEAT BELT3" WIDTH - HEATED SEAT - AUXILIARY INPUT FOR MP3 PLAYER OR AUXILIARY DEVICE - OPERATOR PROTECTIVE GUARD (OPG) LEVEL 1 TOP GUARD - ROPS CERTIFIED CABHYDRAULICCONTROLS: - HYDRAUMIND SYSTEMFULL HYDROSTATIC WITH CLOSED CENTER LOAD SENSING (CLSS) AND ENGINE SENSING WITH VARIABLE SPEED MATCHING CONTROL - PUMP AND ENGINE MUTUAL CONTROL SYSTEM - 1 AXIAL PISTON SWING MOTOR WITH SINGLE STAGE RELIEF VALVE - 2 AXIAL PISTON TRAVEL MOTORS WITH COUNTER BALANCE VALVE - 2 VARIABLE CAPACITY PISTON PUMPS - 7 SPOOL CONTROL VALVE (BOOMARMBUCKETSWINGRIGHT TRAVELLEFT TRAVEL AND 1 SERVICE VALVE(2 PUMP FLOW CAPACITY) - BOOM AND ARM HOLDING VALVES - PATTERN CHANGE VALVE (ISO TO BH CONTROL)OTHER STANDARD EQUIPMENT: - COUNTERWEIGHT12 148 LBS. (5510 KG) - KOMTRAX 5.0 MONITORING SYSTEM (CELLULAR 2G / 3G SYSTEM) - TRAVEL ALARMINCLUDED SPEC EQUIPMENT: -LONG REACH BOOM - CLEAN OUT BUCKET 60

Unit of Measurement
  • Arm (stick) length used for dimensions & forces
    10' 6" ft/in
  • Max depth of vertical wall
    20' 2" ft/in
  • Dump height
    24' 2" ft/in
  • Engine make
    Komatsu
  • Net hp
    196
  • Max normal relief valve pressure
    5,400 psi
  • Transport height
    10' 10" ft/in
  • Tail overhang over side
    4' 1" ft/in
  • Max dig depth
    22' 8" ft/in
  • Reach @ ground level
    34' 4" ft/in
  • Bucket capacity, SAE heaped, min-max
    0.76 - 2.13 cu yds
  • Engine model
    SAA6D107E-3
  • Total flow of main pumps, implement & swing
    126.5 gpm
  • Transport length
    33' 5" ft/in
  • Transport width
    11' 1" ft/in
  • Operating weight
    32.7 metric tons
  • Engine model
    SAA6D107E-3
  • Operating weight
    31.8 metric tons
  • Engine make
    Komatsu
  • Net hp
    196

Equipment Insights

$189,000 price increase |

$0

Previous (04/28/22)

$189,000

Current
158 days on site
0 saves

About the Dealer

Our company was founded in 1984 by four former employees of General Diesel and Equipment. Our primary focus has been to supply heavy construction and aggregate equipment to the construction, mining, oil exploration industries, as well as the municipal governments in North Dakota, South Dakota, Minnesota and Iowa. Starting with one location and 22 employees in 1984, we have grown to 250+ employees in ten U.S. locations including Fargo, Minot, Bismarck and Williston ND; Rapid City and Sioux Falls, SD; Shakopee, Duluth and Hibbing, MN; and Urbana, IA. We also have two locations in Canada in Regina, SK and Winnipeg, MB.

View more listings from General Equipment and Supplies
Listing ID: 3898294