Description

KOMATSU PC35MR-5 HYDRAULIC EXCAVATOREQUIPPED WITH:ENGINE: - KOMATSU 3D88E-7 18.2 NET HP3 CYLINDERNATURALLY ASPIRATED DIRECT INJECTION DIESEL ENGINE4-CYCLE LIQUID-COOLED TIER 4 FINAL CERTIFIED EGRSUCTION TYPE COOLINGFAN WITH GUARDSPIN-ON FUEL AND ENGINE OIL FILTERSFUEL WATER SEPARATOR WITH SHUT-OFFDUAL ELEMENT DRY TYPE AIR CLEANERRESTRICTION INDICATOR. AUTO IDLE SHUTDOWN. ELECTRICAL SYSTEM: - 12 VOLT OPERATING SYSTEM55 AMP ALTERNATOR1.7KW STARTER - BOOM MOUNTED WORK LIGHT - QUICK RELEASE BATTERY TERMINAL UNDERCARRIAGE: - RUBBER TRACK 12" (300MM) - HYDRAULIC TRACK ADJUSTERS - HEAVY DUTY SLOPED TRACK FRAME GUARDS AND COVERS: - ENGINE KEY OPERATES ALL MACHINE LOCKS - ENGINEHYDRAULIC TANKFUEL TANK FILLS ARE INSIDE LOCKABLE - ENGINE AND SIDE COVERSMANUALS IN LOCKABLE COMPARTMENT UNDER THE SEATOPERATOR ENVIRONMENT: - INCLUDES TWO POST ROPS CANOPY - SUSPENSION SEATWITH 3" WIDE RETRACTABLE SEAT BELT - SEAT BELT CAUTION LAMPWRIST RESTSHORNTRAVEL ALARM - REAR VIEW MIRRORSTILT-UP OPERATOR PLATFORM - ENGINE OIL PRESSURE LAMP WITH AUDIBLE ALARM - BATTERY CHARGE LEVEL LAMP WITH AUDIBLE ALARM - PRE-HEATING LAMPENGINE COOLANT TEMPERATURE GAUGE WITH AUDIBLE ALARM AND INDICATOR LIGHTTRAVEL SPEED INDICATOR LAMPSERVICE HOUR METERHYDRAULIC OIL SIGHT GAUGEFUEL GAUGE WITH LOW FUEL INDICATOR LIGHT - HYDRAULIC LOCK LEVERDIAL THROTTLESECONDARY ENGINE SHUTDOWN - ECO MODE3.5" LCD MONITORHYDRAULIC CONTROLS: - CLOSED CENTER LOAD SENSING HYDRAULICSTWO VARIABLE CAPACITY PISTON PUMPS AND TWO GEAR PUMPS PROVIDE HYDRAULIC FLOW O-RING FACE SEAL FITTINGS - PILOT PROPORTIONAL (2) JOYSTICK CONTROLSCONTROL PATTERN CHANGE VALVE (SAE/ISO)AUXILLARY HYDRAULICS SELECTOR VALVE - ONE WAY OR TWO-WAY FLOW. FOOT OPERATED AUXILLIARY HYDRAULICS CONTROL PILOT OPERATED DOZER BLADE - INTEGRAL TRANSMISSION SHIFT SWITCH.DRIVE AND BRAKE SYSTEM: - DUAL RANGE HYDROSTATIC DRIVEAUTOMATIC LOAD SENSING TWO SPEED TRAVEL CONTROLLED BY AN ELECTRIC SWITCH ON THE - BLADE CONTROL LEVER. AXIALPISTON MOTOR FINAL DRIVEAUTOMATIC SWING BRAKEOTHER STANDARD EQUIPMENT - BOOM OFFSET FEATURE - STANDARD 5-1" (1550 MM) DOZER BLADE ASSEMBLY WITH UP/DOWN CONTROL - KOMTRAX LEVEL 5 CELLULAR BASED SYSTEM PROVIDESMACHINE LOCATION - HOUR METER READINGSTRAVEL NOTICEENGINE LOCK CAPABILITY - CUSTOMER ACCESS TO WEBSITE AND NOTIFICATIONS VIA EMAIL OR EMAIL CAPABLE MOBILE PHONEADDITIONAL SPEC-D OPTIONS - 16" ROADLINER TRACKS - PROPORTINAL CONTROLS - 8-4" BOOM +1 - 5-8" ARM +1 - STANDARD DOZER BLADE - CAB HEAT/AC

• Arm (stick) length used for dimensions & forces

  5' 8" ft/in
• Max depth of vertical wall

  10' 3" ft/in
• Dump height

  12' 5" ft/in
• Engine make

  Komatsu
• Net hp

  24.4
• Max relief valve pressure

  3,118 psi
• Transport height

  8' 3" ft/in
• Tail overhang over side

  0" in

• Max dig depth

  11' 4" ft/in
• Reach @ ground level

  18' 1" ft/in
• Bucket capacity, SAE heaped min-max

  1.78 - 6.48 cu ft
• Engine model

  3D88E-7
• Total flow of main pumps, implement & swing

  18.3 gpm
• Transport length

  15' 10" ft/in
• Transport width

  5' 9" ft/in

• Operating weight

  3.7 metric tons
• Engine model

  3D88E-7

• Engine make

  Komatsu
• Net hp

  24.4

View full model specs

powered by

* The information presented includes manufacturer’s specifications and is made available solely for general information purposes. Randall-Reilly does not warrant the accuracy, completeness, or usefulness of this information. Any reliance you place on such information is strictly at your own risk. Any descriptions and specifications with respect to any goods offered for sale herein are not warranted to be accurate or complete. Purchaser agrees that it is purchaser’s responsibility to conduct an inspection of the goods sold herein.