Construction Equipment for Sale

Description

8,000 lb, 42 reach Telehandler with Cab and Heat.

Description

OROPS, MANUAL H PATTERN HAND CONTROLS, POWER TATCH, PAINT IN GOOD CONDITION, 1700 LB ROC, 19GPM AUX HYD, BUCKET, SEAT IN GOOD CONDITION, 12X16.5 TIRES AT 60%

Description

RS5-19 – RS SERIES TELESCOPIC HANDLERS REACHING NEW HEIGHTS: Jobsites demand superior performance, and that's what the RS Series Telescopic Handlers provide. Lifting up to 12,000 pounds (RS12-42) with lift heights up to 55 feet (RS10-55), these machines provide the extra working capacity without sacrificing the comfort and features expected in the RS Series Telescopic Handlers. REAR AXLE STABILIZATION: Stabilizer cylinder locks the rear axle to improve stability whenever the boom is raised 60 degrees or the parking brake is applied. OUTRIGGERS: Add stability and increase capacity when lifting to full height. INTERNAL WET DISC BRAKES: Provide excellent stopping capability and longer life. HEAVY-DUTY BOOMS: Robust boom design easily handle 5,000 to 12,000 pound rated loads. PERFORMANCE The RS5-19 GEN:3 is built to work hard. � Compact size 5' 11" wide & 6' 4" tall � Total weight of 10,000 lbs � With a ground clearance of 14" � Two section telescopic boom has full hydraulic power for all lift and telescopic functions � Hydraulic self-leveling lift action automatically keeps the load level as the boom is raised. � Inboard wet-disc service brakes � Limited slip differential is located on front axle. � Highly visible boom level indicator is located on the outer boom and an easy-to-read frame level gauge is located in the cab OPERATOR'S CABIN: The operator’s cab in the RS5-19 GEN:3 Telescopic Handler is anything but compact. A modern, ergonomic design maximizes comfort. � High-back seat with right-side adjustable armrest; suspension seat optional. � Locking storage compartment under seat. � Full 360° visibility. � Ergonomic design features all gauges, indicator lights and switches on the right-side dash panel � ROPS/FOPS canopy standard; ROPS/FOPS cab with heater or ROPS/FOPS cab with heater & A/C optional HANDLING: To enhance maneuverability, the RS5-19 Telescopic Handler has three steering modes. An operator can change between 2-wheel, 4-wheel and crab-type steering by flipping a switch in the operator’s station. ENGINE: The RS5-19 GEN:3 Telescopic Handler has the power to get work done effectively and efficiently. � Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for repair. � Rexroth 2-speed hydrostatic transmission. � Limited-slip differential in the front axle provides additional traction in muddy and unimproved surfaces. HYDRAULICS: The model RS5-19 GEN:3 makes no exceptions when it comes to hydraulic performance. ATTACHMENTS: There is a tool for every job, and the RS5-19 GEN:3 can power them all. Dynattach® Quick-Attach system allows quick attachment changes with unsurpassed ease. SERVICEABILITY: The RS5-19 GEN:3 Telescopic Handler has an intelligent design that protects components and provides easy access for routine maintenance. � The engine hoo

Description

Gehl R190- Cash price $37,700 -Open Station ROPS -Two Speed with Hydraglide -Standard Flow AUX Hydraulics -Power-A-Tach Hydraulic Powered Quick Attach -Block Heater -Counterweight Installed -Bucket with Cutting edge

Description

M100 – COMPACT EXCAVATOR GET THE SCOOP: Since entering the excavator market in 1987, Gehl has worked its tail off to offer a solid line up of compact excavators. INDUSTRY PROVEN: Yanmar engines provide reliability, maximum power, and proven emissions technology to handle demanding jobs. TRUE ZERO-TAIL SWING: That means no overhang over the tracks on any model in the Gehl product line (expect the M08 & M100). NEW MINIMAL-TAIL SWING: When rotated, the tail overhangs the undercarriage by less than 20% on the M08 and M100 excavator. POWER-A-TACH QUICK COUPLER: Connect attachments hydraulically from the operators station (not available on M08 & Z17). HYDRAULIC THUMB: Factory-installed hydraulic thumb option adds versatility to the jobsite (not available on M08 & Z17). Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.

Description

RS10-55 GEN:3 – RS SERIES TELESCOPIC HANDLERS REACHING NEW HEIGHTS: Jobsites demand superior performance, and that's what the RS Series Telescopic Handlers provide. Lifting up to 12,000 pounds (RS12-42) with lift heights up to 55 feet (RS10-55), these machines provide the extra working capacity without sacrificing the comfort and features expected in the RS Series Telescopic Handlers. REAR AXLE STABILIZATION: Stabilizer cylinder locks the rear axle to improve stability whenever the boom is raised 60 degrees or the parking brake is applied. OUTRIGGERS: Add stability and increase capacity when lifting to full height.\ INTERNAL WET DISC BRAKES: Provide excellent stopping capability and longer life. HEAVY-DUTY BOOMS: Robust boom design easily handle 5,000 to 12,000 pound rated loads. PERFORMANCE: The model RS10-55 GEN:3 is built with high quality components, for long life and superior performance. â—? Boom tip lift hook option is now available as a factory-installed option or field installed option. â—? Proven welded box-section telescopic boom design maximizes material lift and placement. â—? Cylinder design provides one of the fastest cycle times in the industry. â—? Frame leveling feature adjusts 10-degrees to the left and right, for level operation on uneven terrain. â—? Internal wet disc brakes provide excellent braking and long life. â—? Dual-element air filter protects the engine from airborne contaminants, increasing engine performance and longevity. â—? Standard front outriggers provide increased forward reach capacity. OPERATOR'S CABIN: The RS10-55 GEN:3 Telescopic Handler features spacious, durable operator stations to maximize comfort and productivity. â—? Large cab enclosure provides optimal leg room and a spacious operating environment. â—? ROPS/FOPS canopy is standard equipment; ROPS/FOPS enclosed cab is optional. â—? Virtually 360-degree visibility increases safety and operating accuracy. â—? Deluxe high-back seat maximizes operator comfort. Adjustable suspension seat is optional. â—? Side and rear glass is standard equipment. HANDLING: Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch. â—? Tight turning radius of only 13’ 10â€? (4.22 m) is one of the tightest in its class. ENGINE: The RS10-55 GEN:3 Telescopic Handlers provides the power to get work done effectively and efficiently. â—? Dana four-speed power-shift transmission (4-forward/3-reverse speeds) is easy to operate. â—? Limited-slip differential in the front axle provides additional traction in muddy and unimproved surfaces. â—? Transmission clutch cut-out is switchable, and when activated allows faster engine acceleration and more power to the hydraulic system when the brake pedal is depressed. HYDRAULICS: The model RS10-55 GEN:3 has outstanding hydraulic system and control performance. â—

Description

R165 - RADIAL-LIFT SKID LOADERS | THE NEXT REVOLUTION: The versatile Gehl Radial-Lift Skid Loaders are designed to meet the demanding needs of contractors, municipalities, landscapers, mining, dairies and agricultural operations. These skid loaders also excel in excavating, grading and digging below grade applications. Due to the radial-lift path, the maximum reach is greater at the middle of the lift height. This is highly beneficial for loading flatbed trucks, backfilling or dumping over a wall. RADIAL-LIFT: Design offers enhanced performance in excavating, grading and digging below grade applications. Due to the radial lift path, the maximum reach is greater at the middle of the lift height. EXCELLENT FORWARD REACH: The Gehl radial-lift skid loaders provide excellent forward reach at the middle of the lift path. This provides excellent performance for loading flatbed trucks, backfilling or dumping over a wall. DURABLE BUILD: 4.5" (1.35 mm) width lift arm construction delivers superior strength and rigidity. PERFORMANCE: The Gehl R165 rounds up the mid-frame skid loader class with top-notch performance. OPERATOR'S CABIN: The R165 features a new, state-of-the-art, fully-adjustable operator's cab. � Sound reduction material within the cab suppresses outside noise for a quieter operator environment. � A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety. � Standard high-back adjustable seat and optional air-ride suspension seat or mechanical suspension seat provide enhanced, all-day comfort. � Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine. � Hydraloc™ System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition. � Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents. CONTROLS: � Digital color display shows real time fuel consumption, engine RPM's, machine hours, engine diagnostic codes, warning indicators and much more. � Three control options include T-Bar and Hand/Foot. � All instrumentation is conveniently located in the upper-right and left instrument panels for easy access. � Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition. ENGINE: The R165 is equipped with an all-new Yanmar Tier IV naturally-aspirated diesel engine. � Automatic glow plug heating system provides superior cold-weather starting. � After treatment meets all Tier IV requirements through proven technology. HYDRAULICS: The R165 has amped-up hydraulic systems which incorporate intuitive design for precise controllability. � Standard proportional auxiliary hydraulic control gives the operator the ab

Description

RS8-42 GEN:3 – RS SERIES TELESCOPIC HANDLERS REACHING NEW HEIGHTS: Jobsites demand superior performance, and that's what the RS Series Telescopic Handlers provide. Lifting up to 12,000 pounds (RS12-42) with lift heights up to 55 feet (RS10-55), these machines provide the extra working capacity without sacrificing the comfort and features expected in the RS Series Telescopic Handlers. REAR AXLE STABILIZATION: Stabilizer cylinder locks the rear axle to improve stability whenever the boom is raised 60 degrees or the parking brake is applied. OUTRIGGERS: Add stability and increase capacity when lifting to full height. INTERNAL WET DISC BRAKES: Provide excellent stopping capability and longer life. HEAVY-DUTY BOOMS: Robust boom design easily handle 5,000 to 12,000 pound rated loads. PERFORMANCE: The model RS8-42 GEN:3 is built with high quality components, which provide the performance to get the job done. � Boom tip lift hook option is now available as a factory-installed option or field installed option. � Proven welded box-section telescopic boom design maximizes material lift and placement. � Cylinder design provides one of the fastest cycle times in the industry. � Frame leveling feature adjusts 10-degrees to the left and right, for level performance on uneven terrain. � Internal wet disc brakes provide excellent brakingand long life. � Dual-element air filter protects the engine from airborne contaminants, increasing engine performance and longevity. OPERATOR'S CABIN: The RS8-42 GEN:3 Telescopic Handler features spacious, durable operator stations to maximize comfort and productivity. � 44 cubic-foot cab enclosure provides optimal leg room and a spacious operating environment. � ROPS/FOPS canopy is standard equipment; ROPS/FOPS enclosed cab is optional. � Virtually 360-degree visibility increases safety and operating accuracy. � Deluxe high-back seat maximizes operator comfort. Adjustable suspension seat is optional. � Side and rear glass is standard equipment. HANDLING: Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch. � in 4-wheel steer, the machine has a 13' 8" turning radius for machine positioning on tight job sites. ENGINE: The RS8-42 GEN:3 Telescopic Handlers provides the power to get work done effectively and efficiently. � Dana three-speed power-shift transmission is easy to operate. � Limited-slip differential in the front axle provides additional traction in muddy and unimproved surfaces. HYDRAULICS: The model RS8-42 GEN:3 has outstanding hydraulic system and control performance. � Dual-function, pilot-assisted joystick is standard equipment. � Optional tri-function, pilot-assisted joystick allows the operator to set fork tilt and auxiliary function speeds. � Auto-leveling feature keeps loads level when raising/lowering the b

Description

R260 - RADIAL-LIFT SKID LOADERS | THE NEXT REVOLUTION: The versatile Gehl Radial-Lift Skid Loaders are designed to meet the demanding needs of contractors, municipalities, landscapers, mining, dairies and agricultural operations. These skid loaders also excel in excavating, grading and digging below grade applications. Due to the radial-lift path, the maximum reach is greater at the middle of the lift height. This is highly beneficial for loading flatbed trucks, backfilling or dumping over a wall. RADIAL-LIFT: Design offers enhanced performance in excavating, grading and digging below grade applications. Due to the radial lift path, the maximum reach is greater at the middle of the lift height. EXCELLENT FORWARD REACH: The Gehl radial-lift skid loaders provide excellent forward reach at the middle of the lift path. This provides excellent performance for loading flatbed trucks, backfilling or dumping over a wall. DURABLE BUILD: 4.5" (1.35 mm) width lift arm construction delivers superior strength and rigidity. PERFORMANCE: With over 40 years of skid loader manufacturing experience, Gehl has taken performance to the next level with the R260 Skid Loader. OPERATOR'S CABIN: The new R260 has a spacious operator station with plenty of adjustability and enhanced comfort features that users have come to expect from Gehl. � Large Level II ROPS/FOPS is standard equipment. � New side-folding restraint bar and adjustable armrests enhance operator safety and comfort. � Adjustable control pods (joystick and hand/foot configurations) and an optional air-ride seat deliver outstanding comfort. � Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine. � Extra-large side screens combined with Gehl PowerView® low-profile lift arm design provide a wide field-of-view to the side work areas. � Optional pressurized sealed cab enclosure with sound reduction material and rear-mounted air filter provide a cleaner, quieter, climate controlled operating environment. CONTROLS: Controls on the R260 incorporate intuitive design, state-of-the-art technology and plenty of options to suit the preference of any operator. � Four control options include T-Bar, Joystick, Dual-Hand, and Hand/Foot. � Auxiliary controls are located on the control grip in all control configurations for easy access. � Customizable integrated digital display provides coolant, fuel, battery, environmental and engine regeneration, and more information in real time. � Adjustable joystick control pods provide ease of operator control with minimal effort, reducing fatigue. � New upper-left and upper-right instrument panels provide easy readout and switch access. � Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition. ENGINE: The R260 is equipped with a top-of-the-line Y

Description

M08 – COMPACT EXCAVATOR GET THE SCOOP: Since entering the excavator market in 1987, Gehl has worked its tail off to offer a solid line up of compact excavators. INDUSTRY PROVEN: Yanmar engines provide reliability, maximum power, and proven emissions technology to handle demanding jobs. TRUE ZERO-TAIL SWING: That means no overhang over the tracks on any model in the Gehl product line (expect the M08 & M100). NEW MINIMAL-TAIL SWING: When rotated, the tail overhangs the undercarriage by less than 20% on the M08 and M100 excavator. POWER-A-TACH QUICK COUPLER: Connect attachments hydraulically from the operators station (not available on M08 & Z17). HYDRAULIC THUMB: Factory-installed hydraulic thumb option adds versatility to the jobsite (not available on M08 & Z17). Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.

Description

RS8-42 Mark74 – RS SERIES TELESCOPIC HANDLERS REACHING NEW HEIGHTS: Jobsites demand superior performance, and that's what the RS Series Telescopic Handlers provide. Lifting up to 12,000 pounds (RS12-42) with lift heights up to 55 feet (RS10-55), these machines provide the extra working capacity without sacrificing the comfort and features expected in the RS Series Telescopic Handlers. REAR AXLE STABILIZATION: Stabilizer cylinder locks the rear axle to improve stability whenever the boom is raised 60 degrees or the parking brake is applied. OUTRIGGERS: Add stability and increase capacity when lifting to full height. INTERNAL WET DISC BRAKES: Provide excellent stopping capability and longer life. HEAVY-DUTY BOOMS: Robust boom design easily handle 5,000 to 12,000 pound rated loads. PERFORMANCE: The model RS8-42 Mark74 is built with high quality components, which provide the performance to get the job done. � Boom tip lift hook option is now available as a factory-installed option or field installed option. � Proven welded box-section telescopic boom design maximizes material lift and placement. � Cylinder design provides one of the fastest cycle times in the industry. � Frame leveling feature adjusts 10-degrees to the left and right, for level performance on uneven terrain. � Internal wet disc brakes provide excellent brakingand long life. � Dual-element air filter protects the engine from airborne contaminants, increasing engine performance and longevity. OPERATOR'S CABIN: The RS8-42 Mark74 Telescopic Handler features spacious, durable operator stations to maximize comfort and productivity. � 44 cubic-foot cab enclosure provides optimal leg room and a spacious operating environment. � ROPS/FOPS canopy is standard equipment; ROPS/FOPS enclosed cab is optional. � Virtually 360-degree visibility increases safety and operating accuracy. � Deluxe high-back seat maximizes operator comfort. Adjustable suspension seat is optional. � Side and rear glass is standard equipment. HANDLING: Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch. � in 4-wheel steer, the machine has a 13' 8" turning radius for machine positioning on tight job sites. ENGINE: The RS8-42 Mark74 Telescopic Handlers provides the power to get work done effectively and efficiently. � Dana three-speed power-shift transmission is easy to operate. � Limited-slip differential in the front axle provides additional traction in muddy and unimproved surfaces. HYDRAULICS: The model RS8-42 Mark74 has outstanding hydraulic system and control performance. � Dual-function, pilot-assisted joystick is standard equipment. � Optional tri-function, pilot-assisted joystick allows the operator to set fork tilt and auxiliary function speeds. � Auto-leveling feature keeps loads level when raising/lowering

Description

R190 - RADIAL-LIFT SKID LOADERS | THE NEXT REVOLUTION: The versatile Gehl Radial-Lift Skid Loaders are designed to meet the demanding needs of contractors, municipalities, landscapers, mining, dairies and agricultural operations. These skid loaders also excel in excavating, grading and digging below grade applications. Due to the radial-lift path, the maximum reach is greater at the middle of the lift height. This is highly beneficial for loading flatbed trucks, backfilling or dumping over a wall. RADIAL-LIFT: Design offers enhanced performance in excavating, grading and digging below grade applications. Due to the radial lift path, the maximum reach is greater at the middle of the lift height. EXCELLENT FORWARD REACH: The Gehl radial-lift skid loaders provide excellent forward reach at the middle of the lift path. This provides excellent performance for loading flatbed trucks, backfilling or dumping over a wall. DURABLE BUILD: 4.5" (1.35 mm) width lift arm construction delivers superior strength and rigidity. PERFORMANCE: With over 40 years of skid loader manufacturing experience, Gehl has taken performance to the next level with the R190 Skid Loader. OPERATOR'S CABIN: The new R190 has a spacious operator station with plenty of adjustability and enhanced comfort features that users have come to expect from Gehl. � Large Level II ROPS/FOPS is standard equipment. � New side-folding restraint bar and adjustable armrests enhance operator safety and comfort. � Adjustable control pods (joystick and hand/foot configurations) and an optional air-ride seat deliver outstanding comfort. � Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine. � Extra-large side screens combined with Gehl PowerView® low-profile lift arm design provide a wide field-of-view to the side work areas. � Optional pressurized sealed cab enclosure with sound reduction material and rear-mounted air filter provide a cleaner, quieter, climate controlled operating environment. CONTROLS: Controls on the R190 incorporate intuitive design, state-of-the-art technology and plenty of options to suit the preference of any operator. � Four control options include T-Bar, Joystick, Dual-Hand, and Hand/Foot. � Auxiliary controls are located on the control grip in all control configurations for easy access. � Customizable integrated digital display provides coolant, fuel, battery, environmental and engine regeneration, and more information in real time. � Adjustable joystick control pods provide ease of operator control with minimal effort, reducing fatigue. � New upper-left and upper-right instrument panels provide easy readout and switch access. � Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition. ENGINE: The R190 is equipped with a top-of-the-line Y

Description

RS6-34 GEN:3 – RS SERIES TELESCOPIC HANDLERS REACHING NEW HEIGHTS: Jobsites demand superior performance, and that's what the RS Series Telescopic Handlers provide. Lifting up to 12,000 pounds (RS12-42) with lift heights up to 55 feet (RS10-55), these machines provide the extra working capacity without sacrificing the comfort and features expected in the RS Series Telescopic Handlers. REAR AXLE STABILIZATION: Stabilizer cylinder locks the rear axle to improve stability whenever the boom is raised 60 degrees or the parking brake is applied. OUTRIGGERS: Add stability and increase capacity when lifting to full height. INTERNAL WET DISC BRAKES: Provide excellent stopping capability and longer life. HEAVY-DUTY BOOMS: Robust boom design easily handle 5,000 to 12,000 pound rated loads. PERFORMANCE: The model RS6-34 is built with high quality components for proven performance. � Welded box-section boom design for maximum load placement ability. � Well-thought-out cylinder design provides one of the fastest cycle times in the industry. � Frame leveling feature adjusts 10-degrees to the left and right, for level performance on uneven terrain. � Internal wet disc brakes provide excellent braking and long life. � Dual-element air filter protects the engine from airborne contaminants, increasing engine performance and longevity. OPERATOR'S CABIN: The RS6-34 Telescopic Handler features a durable operator's compartment to maximize comfort and productivity. � 44 cubic-foot cab enclosure provides optimal leg room and a spacious operating environment. � ROPS/FOPS canopy is standard equipment; ROPS/FOPS enclosed cab is optional. � Virtually 360-degree visibility increases safety and operating accuracy. � Deluxe high-back seat maximizes operator comfort. Adjustable suspension seat is optional. � Side and rear glass is standard equipment. HANDLING: In 4 wheel steer the machine turn radius can be as small as 12' 6" for machine positioning on tight job sites. � Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch. ENGINE: The RS6-34 Telescopic Handlers provides the power to get work done effectively and efficiently. � Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for repair. � Dana three-speed power-shift transmission is easy to maintain. � Limited-slip differential in the front axle provides additional traction in muddy and unimproved surfaces. HYDRAULICS: The model RS6-34 GEN:3 has the hydraulic system power to get the job done. � Dual-function, pilot-assisted joystick is standard equipment. � Optional tri-function, pilot-assisted joystick allows the operator to set forktilt and auxiliary function speeds. � Auto-leveling feature keeps loads level when raising/lowering the boom. ATTACHMENTS: There is a tool

Description

Z17 GEN:2 – COMPACT EXCAVATOR GET THE SCOOP: Since entering the excavator market in 1987, Gehl has worked its tail off to offer a solid line up of compact excavators. INDUSTRY PROVEN: Yanmar engines provide reliability, maximum power, and proven emissions technology to handle demanding jobs. TRUE ZERO-TAIL SWING: That means no overhang over the tracks on any model in the Gehl product line (expect the M08 & M100). NEW MINIMAL-TAIL SWING: When rotated, the tail overhangs the undercarriage by less than 20% on the M08 and M100 excavator. POWER-A-TACH QUICK COUPLER: Connect attachments hydraulically from the operators station (not available on M08 & Z17). HYDRAULIC THUMB: Factory-installed hydraulic thumb option adds versatility to the jobsite (not available on M08 & Z17). OPERATOR'S CABIN: The ergonomic operator's cabin on the Z17 GEN: 2 provides excellent visibility and easy entry and exit. � Walk-through canopy for easy entry and exit. � Excellent visibility in all directions allows safe and efficient operation. Rear mirror provides a view of the back and side of the machine for additional safety. � Work lights and integrated boom light enhances the operator’s view after dark. CONTROLS: The controls on the Z17 GEN: 2 are ergonomically designed and easy to use. � Large travelling pedals are easy to press and allow confident, reliable work. � Pilot operated joystick controls are operated by simple wrist movements, reducing fatigue during a long workday. � One-way auxiliary functions can be controlled by a foot pedal, allowing optimal control of high-flow attachments such as compactors or breakers. � The operator can easily select from ISO or standard operating control patterns with the flip of a mechanical lever. BOOM: Rugged, high-strength boom incorporates features to protect and extend the life of moving parts and components. � Precision welded boom is constructed with thick side plates that are reinforced by contoured transition plates. � Heavy-duty sliding cylinder guards protect exposed cylinder rods from damage. � Integrated boom light illuminates the work area and allows for safe and effective operation after dark. � Reliable single pin boom mount design for optimal durability and component life. UNDERCARRIAGE: The undercarriage of the Z17 GEN: 2 was designed with serviceability and longevity in mind. � Staggered tread and mandrel design combined with shorter track pitch reduces vibration. � Long tracks provide a smoother ride over rough terrain. � Tracks are short-pitched to reduce wear, fatigue and damage. � Angled crawler frame reduces soil buildup on the undercarriage, extending the life of rollers and tracks. � Tracks hydraulically extend to 4'2" (1280 mm) to enhance stability or retract to 3' 1" (950 mm) for passageway through doors and gates. ENGINE: The Z17 GEN: 2 is built around a powerful, reliable emission-c

Description

DL11-44 GEN:3 – DL SERIES TELESCOPIC HANDLERS TOWER OVER THE REST: Get everything you ever wanted in a telescopic handler with the DL Series from Gehl. High Lift. Long Reach. Big Load Capacity. These machines do it all. With unmatched versatility, visibility and comfort, the DL Series provides performance you can count on. A full line of easy-to-install attachments allow you to lift in the morning and load in the afternoon. TOWERING LIFT HEIGHTS: Lift heights from 40-feet (13.5 m) to 55-feet (16.8 m). HEIGHT PERFORMANCE: Robust, heavy-duty booms with lift capacities of 7,000 lbs. (3175 kg) to 12,000 lbs. (5443 kg). TURBO POWER: Standard 115 hp (86 kW) turbocharged Interim Tier IV engine. THE DL11-44 GEN:3 TELESCOPIC HANDLER IS A TOOL TO INCREASE JOBSITE PRODUCTIVITY, DEVELOP NEW BUSINESS AND IMPROVE YOUR RETURN-ON-INVESTMENT: � Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged, if the boom is raised 60 degrees or higher, or if the PWP System is activated. � 10-degree frame tilt in both directions. � Double universal joints for tight turn radius without applying stress on the axle. � Two-wheel, four-wheel, crab steering standard. � Standard centrifugal pre-cleaner and two-stage air cleaner. � Powershift transmission with four forward and two reverse gears, with a 2-year/2,000-hour warranty. � Standard pneumatic tires. � ROPS and FOPS certified operator's compartment. OPERATOR'S CABIN: Comfort comes standard on the DL11-44 GEN:3 Telescopic Handler, boasting 57 cubic feet of interior space. � GEN3 F-N-R Single Joystick that allow operators precise movement of heavy loads � Lockable, two-piece cab door for security, communication and cross-ventilation. � Standard lockable storage compartment for service items, such as work gloves, tools, blueprints and more. � Choice of canopy or cab with heating and defrosting systems standard (air-conditioning optional). � Un-matched panoramic visibility increases work-site safety and operator productivity and reduces operator fatigue. HANDLING: � Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch. � Industry loading job site maneuverability with a 12' 2" turning radius. ENGINE: The DL11-44 GEN:3 Telescopic Handlers provides the power to get work done effectively and efficiently � Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for loading or repair. Manufacture - Cummins Model - 3.8L QSF Tier IV Power (kW) - 120 hp (89) Maximum Travel Speed (km/hr) - 22.8 mph (36.7) HYDRAULICS: The DL11-44 GEN:3 Telescopic Handler has the hydraulic power to get the job done. Pump Type - Open-Center, Dual-Section Total Capacity (L/min) - 43 gpm (162.8) Main Relief Pressure (bar) - 3,000 psi (207) Auxiliary Relief Pressure (bar) - 2

Description

CAB, HEAT, AIR, 2-SPEED, HIGH FLOW HYDRAULICS AT 40 GPM, STANDARD FLOW AT 32GPM, 4000 LB ROC, RIDE CONTROL, POWER TATCH, BUCKET, JOYSTICK CONTROLS, 14X17.5 TIRES, ENGINE AIRFILTER PRE CLEANER, AIR RID

Description

V270 – VERTICAL LIFT SKID LOADER PERFORMANCE The V270 GEN:2 Skid Loader is a product of superior innovation and well thought-out product development. � Emissions certified Tier IV engines combine power and efficiency. � Self leveling lift action for better control of lifting loads. � The chassis aids in superior weight distribution, which further enhances stability. � Thick steel plating and heavy-duty pins and bushings make this loader stronger than any other machine in its class. � A heavily constructed vertical-lift boom provides substantial forward reach at trailer loading and dumping heights. � Electronic engine control and foot throttle allow operation at part throttle, reducing sound levels and fuel consumption. OPERATOR'S CABIN The spacious operator’s compartment on the V270 GEN:2 Skid Loader is every operator’s dream. � Level II FOPS is standard equipment. � Optional pressurized sealed cab enclosure with sound reduction material and rear-mounted air filter provide cleaner and quieter operating environment. � Extra-large side screens combined with a low-profile lift arm design provide a wide field-of-view to the side work areas. � Fully adjustable controls and an optional air-ride seat deliver outstanding comfort. � Domed, wide-view glass door option reduces glare and provides optimal visibility to the lift arm, work tool and front work area. Large top, front window provides a clear view of the lift arm in its higher lift positions. CONTROLS The V270 GEN:2 Skid Loader is ergonomically designed to reduce operator fatigue and increase productivity. � T-Bar and dual-hand controls now available. � Optional electronic attachment control - 14-pin connector for easy operation of all attachments. � Adjustable joystick handles provide for ease of operator control with minimal of effort, to reduce fatigue. � New upper-left and upper-right instrument panels provide easy readout and switch access. � Pilot joystick controls or pilot hand/foot controls provide the ultimate in operator comfort, ease and controllability. � Infinitely adjustable proportional auxiliary hydraulics. � Hydraloc™ system applies brakes whenever the operator raises restraint bar, leaves the operator’s seat or switches off the ignition. ENGINE Emissions certified Tier IV engines combine power and efficiency on the V270 GEN:2 model. � Engine consumes less fuel, making a positive impact on the bottom line. � Automatic glow module engine intake heating system provides superior cold-weather starting. � Engine has conventional water/ethylene glycol liquid-cooled design. � Engine warranty, parts and service are handled through normal dealership servicing in conjunction with Gehl parts and service support. HYDRAULICS When maximum hydraulic power is needed to run demanding attachments, the V270 GEN:2 Sk

Description

R220 - RADIAL-LIFT SKID LOADERS | THE NEXT REVOLUTION: The versatile Gehl Radial-Lift Skid Loaders are designed to meet the demanding needs of contractors, municipalities, landscapers, mining, dairies and agricultural operations. These skid loaders also excel in excavating, grading and digging below grade applications. Due to the radial-lift path, the maximum reach is greater at the middle of the lift height. This is highly beneficial for loading flatbed trucks, backfilling or dumping over a wall. RADIAL-LIFT: Design offers enhanced performance in excavating, grading and digging below grade applications. Due to the radial lift path, the maximum reach is greater at the middle of the lift height. EXCELLENT FORWARD REACH: The Gehl radial-lift skid loaders provide excellent forward reach at the middle of the lift path. This provides excellent performance for loading flatbed trucks, backfilling or dumping over a wall. DURABLE BUILD: 4.5" (1.35 mm) width lift arm construction delivers superior strength and rigidity. PERFORMANCE: With over 40 years of skid loader manufacturing experience, Gehl has taken performance to the next level with the R220 Skid Loader. OPERATOR'S CABIN: The new R220 has a spacious operator station with plenty of adjustability and enhanced comfort features that users have come to expect from Gehl. � Large Level II ROPS/FOPS is standard equipment. � New side-folding restraint bar and adjustable armrests enhance operator safety and comfort. � Adjustable control pods (joystick and hand/foot configurations) and an optional air-ride seat deliver outstanding comfort. � Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine. � Extra-large side screens combined with Gehl PowerView® low-profile lift arm design provide a wide field-of-view to the side work areas. � Optional pressurized sealed cab enclosure with sound reduction material and rear-mounted air filter provide a cleaner, quieter, climate controlled operating environment. CONTROLS: Controls on the R220 incorporate intuitive design, state-of-the-art technology and plenty of options to suit the preference of any operator. � Four control options include T-Bar, Joystick, Dual-Hand, and Hand/Foot. � Auxiliary controls are located on the control grip in all control configurations for easy access. � Customizable integrated digital display provides coolant, fuel, battery, environmental and engine regeneration, and more information in real time. � Adjustable joystick control pods provide ease of operator control with minimal effort, reducing fatigue. � New upper-left and upper-right instrument panels provide easy readout and switch access. � Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition. ENGINE: The R220 is equipped with a top-of-the-line Y

Description

DL12-55 GEN:3 – DL SERIES TELESCOPIC HANDLERS TOWER OVER THE REST: Get everything you ever wanted in a telescopic handler with the DL Series from Gehl. High Lift. Long Reach. Big Load Capacity. These machines do it all. With unmatched versatility, visibility and comfort, the DL Series provides performance you can count on. A full line of easy-to-install attachments allow you to lift in the morning and load in the afternoon. TOWERING LIFTS HEIGHTS: Lift heights from 40-feet (13.5 m) to 55-feet (16.8 m). HIGH PERFORMANCE: Robust, heavy-duty booms with lift capacities of 7,000 lbs. (3175 kg) to 12,000 lbs. (5443 kg). TURBO POWER: Standard 115 hp (86 kW) turbocharged Interim Tier IV engine. PERFORMANCE: The DL12-55 GEN:2 Telescopic Handler is a tool to increase jobsite productivity, develop new business and improve your return-on-investment. � Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged, if the boom is raised 60 degrees or higher, or if the PWP System is activated. � 10-degree frame tilt in both directions. � Double universal joints for tight turn radius without applying stress on the axle. � Two-wheel, four-wheel, crab steering standard. � Standard centrifugal pre-cleaner and two-stage air cleaner. � Powershift transmission with four forward and two reverse gears, with a 2-year/2,000-hour warranty. � Standard pneumatic tires. � ROPS and FOPS certified operator's compartment. OPERATOR'S CABIN: Comfort comes standard on the DL12-55 GEN:2 Telescopic Handler, boasting 57 cubic feet of interior space. � GEN3 F-N-R Single Joystick that allow operators precise movement of heavy loads � Lockable, two-piece cab door for security, communication and cross-ventilation. � Standard lockable storage compartment for service items, such as work gloves, tools, blueprints and more. � Choice of canopy or cab with heating and defrosting systems standard (air-conditioning optional). � Un-matched panoramic visibility increases work-site safety and operator productivity and reduces operator fatigue HANDLING: � Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch. � Industry loading job site maneuverability with a 12' 2" turning radius. ENGINE: The DL12-55 GEN:2 Telescopic Handlers provides the power to get work done effectively and efficiently. � Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for loading or repair. HYDRAULICS: The DL12-55 GEN:2 Telescopic Handler has the hydraulic power to get the job done. ATTACHMENTS: There is a tool for every job, and the DL12-55 GEN:2 can power them all. Dynattach® Quick-Attach system allows quick attachment changes with unsurpassed ease. SERVICEABILITY: Side-mounted engine improves serviceability, allowing three-sided service

Description

RT250 GEN:3 - RADIAL-LIFT COMPACT TRACK LOADERS TAKING PERFORMANCE TO THE NEXT LEVEL: The RT Series Track Loaders from Gehl provide high performance in a fully customizable package. The new RT175 GEN:3, RT210 GEN:3, and RT250 GEN:3 take high-capacity power, breakout force and tractive effort to a new level. For larger jobs, the RT250 GEN:3 brings the extra capacity. Since entering the track loader market in 2001, Gehl has dedicated itself to the needs of its equipment owners. We have ensured that our track loaders provide the power and features necessary to get the job done. This decade of expertise has culminated in the RT Series track loaders. FOLD-UP DOOR: GEN:3 enhancement, this patented new design provides cab-to-canopy versatility, all while maintaining low clearance and a Level II FOPS certification. ELIMINATE TENSION HEADACHES: The IdealTrax™ Automatic Track Tensioning System maintains tensioning of the tracks when the engine is started and during operation. POWERFUL DIESEL ENGINES: Tier IV-certified Yanmar diesel engines provide 69.9 hp on the RT175 GEN:3, 72 hp on the RT210 GEN:3, & 74.3 hp RT250 GEN:3. PRODUCTIVE PERFORMANCE: These machines pack a punch when it comes to efficiently transferring power to tractive effort. SPACIOUS CAB INTERIOR: Ergonomic and adjustable operator's station provides class leading comfort. PERFORMANCE: The Gehl RT250 GEN:3 Compact Track Loader was designed from the ground up... � Tier IV-certified Yanmar diesel engines provide 72 hp (53.7 kW) � Designed from the ground up, the welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride. � Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility. � Optional rear bumper/counterweight provides additional protection and towing capability. � Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work. � Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption. OPERATOR'S CABIN: The extra-large, state-of-the art operator’s station on the RT250 GEN:3 Track Loader is designed for optimal operator comfort resulting in more productivity. � Cab forward design enhances the view to the bucket. � Level II FOPS is standard equipment. � New, side-folding restraint bars and armrests with multiple adjustments enhance operator safety and comfort. � Fully adjustable controls mounted to a standard mechanical suspension seat or an optional air-ride seat deliver outstanding comfort and precision control by moving with the operator during operation. � Complicated gauges and cluttered dash readouts are eliminated with a customization, easy-to-use multi-function display that incorporates all warning/operation lights and machine configuration screens. � Optional pres

Description

DL12-40 GEN:3 – DL SERIES TELESCOPIC HANDLERS TOWER OVER THE REST: Get everything you ever wanted in a telescopic handler with the DL Series from Gehl. High Lift. Long Reach. Big Load Capacity. These machines do it all. With unmatched versatility, visibility and comfort, the DL Series provides performance you can count on. A full line of easy-to-install attachments allow you to lift in the morning and load in the afternoon. TOWERING LIFT HEIGHTS: Lift heights from 40-feet (13.5 m) to 55-feet (16.8 m). HIGH PERFORMANCE: Robust, heavy-duty booms with lift capacities of 7,000 lbs. (3175 kg) to 12,000 lbs. (5443 kg). TURBO POWER: Standard 115 hp (86 kW) turbocharged Interim Tier IV engine. PERFORMANCE: The DL12-40 GEN;2 Telescopic Handler is a tool to increase jobsite productivity, develop new business and improve your return-on-investment. � Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged, if the boom is raised 60 degrees or higher, or if the PWP System is activated. � 10-degree frame tilt in both directions. � Double universal joints for tight turn radius without applying stress on the axle. � Two-wheel, four-wheel, crab steering standard. � Standard centrifugal pre-cleaner and two-stage air cleaner. � Powershift transmission with four forward and two reverse gears, with a 2-year/2,000-hour warranty. � Standard pneumatic tires. � ROPS and FOPS certified operator's compartment. OPERATOR'S CABIN: Comfort comes standard on the DL12-40 GEN:2 Telescopic Handler, boasting 57 cubic feet of interior space. � GEN3 F-N-R Single Joystick that allow operators precise movement of heavy loads � Lockable, two-piece cab door for security, communication and cross-ventilation. � Standard lockable storage compartment for service items, such as work gloves, tools, blueprints and more. � Choice of canopy or cab with heating and defrosting systems standard (air-conditioning optional). � Un-matched panoramic visibility increases work-site safety and operator productivity and reduces operator fatigue. HANDLING: � Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch. � Industry loading job site maneuverability with a 12' 2" turning radius. ENGINE The DL12-40 GEN:2 Telescopic Handlers provides the power to get work done effectively and efficiently. � Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for loading or repair. HYDRAULICS: The DL12-40 GEN:2 Telescopic Handler has the hydraulic power to get the job done. ATTACHMENTS: There is a tool for every job, and the DL12-40 GEN:2 can power them all. The DL units feature three attachment options: Dynattach®, Dynacarrier, and Dynacarrier with hydraulic locking. SERVICEABILITY: Side-mounted engine improves serviceability, allo

Description

RT165 - RADIAL-LIFT COMPACT TRACK LOADERS TAKING PERFORMANCE TO THE NEXT LEVEL: The RT Series Track Loaders from Gehl provide high performance in a fully customizable package. The new RT175 GEN:3, RT210 GEN:3, and RT250 GEN:3 take high-capacity power, breakout force and tractive effort to a new level. For larger jobs, the RT250 GEN:3 brings the extra capacity. Since entering the track loader market in 2001, Gehl has dedicated itself to the needs of its equipment owners. We have ensured that our track loaders provide the power and features necessary to get the job done. This decade of expertise has culminated in the RT Series track loaders. FOLD-UP DOOR: GEN:3 enhancement, this patented new design provides cab-to-canopy versatility, all while maintaining low clearance and a Level II FOPS certification. ELIMINATE TENSION HEADACHES: The IdealTraxâ„¢ Automatic Track Tensioning System maintains tensioning of the tracks when the engine is started and during operation. POWERFUL DIESEL ENGINES: Tier IV-certified Yanmar diesel engines provide 69.9 hp on the RT175 GEN:3, 72 hp on the RT210 GEN:3, & 74.3 hp RT250 GEN:3. PRODUCTIVE PERFORMANCE: These machines pack a punch when it comes to efficiently transferring power to tractive effort. SPACIOUS CAB INTERIOR: Ergonomic and adjustable operator's station provides class leading comfort. PERFORMANCE: The Gehl RT165 Compact Track Loader is taking performance to the next level. â—? Tier IV-certified Yanmar diesel engines provide 69.9 hp (52.1 kW) â—? The welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride. â—? Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility. â—? Optional rear bumper/counterweight provides additional protection and towing capability. â—? Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work. â—? Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption. OPERATOR'S CABIN: â—? Cab forward design enhances the view to the bucket. â—? Level II FOPS is standard equipment. â—? New, side-folding restraint bars and armrests with multiple adjustments enhance operator safety and comfort. â—? Fully adjustable controls mounted to a standard mechanical suspension seat or an optional air-ride seat deliver outstanding comfort and precision control by moving with the operator during operation. â—? Complicated gauges and cluttered dash readouts are eliminated with a customizable, easy-to-use multi-function display that incorporates all warning/operation lights and machine configuration screens. â—? Optional pressurized sealed cab enclosure with heat/AC, sound reduction material and rear-mounted air filter provide a comfortable, clean and quiet operating environment. CONTROLS: Controls on the Gehl RT165 Comp

Description

RS8-44 GEN:3 – RS SERIES TELESCOPIC HANDLERS REACHING NEW HEIGHTS: Jobsites demand superior performance, and that's what the RS Series Telescopic Handlers provide. Lifting up to 12,000 pounds (RS12-42) with lift heights up to 55 feet (RS10-55), these machines provide the extra working capacity without sacrificing the comfort and features expected in the RS Series Telescopic Handlers. REAR AXLE STABILIZATION: Stabilizer cylinder locks the rear axle to improve stability whenever the boom is raised 60 degrees or the parking brake is applied. OUTRIGGERS: Add stability and increase capacity when lifting to full height. INTERNAL WET DISC BRAKES: Provide excellent stopping capability and longer life. HEAVY-DUTY BOOMS: Robust boom design easily handle 5,000 to 12,000 pound rated loads. PERFORMANCE: The model RS8-44 GEN:3 is built with high quality components, which provide the performance to get the job done. � Boom tip lift hook option is now available as a factory-installed option or field installed option. � Proven welded box-section telescopic boom design maximizes material lift and placement. � Cylinder design provides one of the fastest cycle times in the industry. � Frame leveling feature adjusts 10-degrees to the left and right, for level performance on uneven terrain. � Internal wet disc brakes provide excellent brakingand long life. � Dual-element air filter protects the engine from airborne contaminants, increasing engine performance and longevity. OPERATOR'S CABIN: The RS8-44 GEN:3 Telescopic Handler features spacious, durable operator stations to maximize comfort and productivity. � 44 cubic-foot cab enclosure provides optimal leg room and a spacious operating environment. � ROPS/FOPS canopy is standard equipment; ROPS/FOPS enclosed cab is optional. � Virtually 360-degree visibility increases safety and operating accuracy. � Deluxe high-back seat maximizes operator comfort. Adjustable suspension seat is optional. � Side and rear glass is standard equipment. HANDLING: Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch. � in 4-wheel steer, the machine has a 13' 8" turning radius for machine positioning on tight job sites. ENGINE: The RS8-44 GEN:3 Telescopic Handlers provides the power to get work done effectively and efficiently. � Dana three-speed power-shift transmission is easy to operate. � Limited-slip differential in the front axle provides additional traction in muddy and unimproved surfaces. HYDRAULICS: The model RS8-44 GEN:3 has outstanding hydraulic system and control performance. � Dual-function, pilot-assisted joystick is standard equipment. � Optional tri-function, pilot-assisted joystick allows the operator to set fork tilt and auxiliary function speeds. � Auto-leveling feature keeps loads level when raising/lowering the b